APPROVED DOCUMENT K

 0    58 flashcards    sim
tải về mp3 In chơi tự kiểm tra
 
câu hỏi câu trả lời
approved
What is a approved Document?
bắt đầu học
zatwierdzony
Building Regulations
bắt đầu học
Przepisy budowlane
protection from impact
Protection from falling, collision and impact
bắt đầu học
Ochrona przed uderzeniami
impact
The definition of impact is one thing crashing into or having an affect on another.
bắt đầu học
wpływ / zderzenie
ladder
bắt đầu học
drabina
loading bays
bắt đầu học
strefa załadunku
Vehicle barriers
bắt đầu học
Bariery pojazdów
glazing
bắt đầu học
szyby
provisions
Additional provisions for glazing in buildings other than dwellings.
bắt đầu học
Przepisy
dwellings
Additional provisions for glazing in buildings other than dwellings.
bắt đầu học
mieszkaniowe
trapping by doors
trap.
bắt đầu học
uwięzienie przez drzwi
pułapka
compliance with the law
bắt đầu học
zgodność z prawem
workmanship
bắt đầu học
jakość wykonania
Handrail
bắt đầu học
Poręcz
helical stair
helical stair = spiral stair
bắt đầu học
spiralny schody
noising
bắt đầu học
nosek schodów
stair tread
bắt đầu học
stopnica
pitch
bắt đầu học
kąt nachylenia
rise
bắt đầu học
wysokość stopnia
riser
bắt đầu học
wysokość stopnia
landing
The width and length of every landing should be at least as great as the smallest width of the flight. (minimum 1 m)
bắt đầu học
podest / spocznik
staircase
bắt đầu học
klatka schodowa
stair enclosure
bắt đầu học
klatka schodowa
flight of stairs
bắt đầu học
bieg schodów
straight flight stairs
bắt đầu học
Schody jednobiegowe proste
dog-legged stairs
bắt đầu học
Schody dwubiegunowe proste
winding stairs
bắt đầu học
kręte schody
cantiliver stairs
bắt đầu học
schody wspornikowe
timber stairs
bắt đầu học
Schody z drewna
going
going = tread
bắt đầu học
stopnica
RISER in PRIVATE STAIRS
Rise maximum 220mm. RISE = 150mm- 220mm.
bắt đầu học
wysokość stopnia
H = 150mm-220mm
GOING in PRIVATE STAIRS
GOING minimum 220mm. GOING = 220mm- 300mm.
bắt đầu học
SZEROKOŚĆ STOPNIA
intended
Private: intended to be used for only one dwelling.
bắt đầu học
przeznaczony
assembly
Institutional and assembly: Serving a place where many people gather.
bắt đầu học
zgromadzenie
gather
Institutional and assembly: Serving a place where many people gather.
bắt đầu học
zbierać
headroom
Minimum headroom= 2m.
bắt đầu học
wysokość prześwitu
Institutional and assembly stairs
Maximum rise = 180mm. Minimum going 280.(If the area of a floor of the building is less than 100m2, the going may be reduced to 250mm.)
bắt đầu học
Instytucjonalne i zbiorowe schody
Pitch
the maximum pitch for private stair is 42°.
bắt đầu học
kąt nachylenia
gangway for seated spectators
The maximum pitch for gangways for seated spectators is 35°.
bắt đầu học
Przejście na siedzących widzów
escalator
bắt đầu học
schody ruchome
stair well
bắt đầu học
dusza schodów
fire escape stairs
bắt đầu học
schody ewakuacyjne
dividing flights
A stair in a public building which is wider than 1800mm should be divided into flights which are not wider than 1800mm.
bắt đầu học
podzielenie biegu
length of flights
The number of risers in a flight should be limited to 16 if a stair serves an area used as a shop or for assembly purposes.
bắt đầu học
długość biegu
lending next to doors
at least 400mm.
bắt đầu học
spocznik obok drzwi
cupboard
at least 400mm.
bắt đầu học
szafka nad spocznikiem
alternating tread stair
bắt đầu học
zmienny stopień
walkways
bắt đầu học
chodniki
Handrails for stairs
In all buildings hadrail height should be between 900mm and 1000mm measured to the top of the handrail from the pitch line or floor.
bắt đầu học
Poręcze na schodach
guarding
Flights and landings shoul be guarded at the sides (in dewellings) when there is a drop of more than 600mm.
bắt đầu học
osłona / ochrona
drop
bắt đầu học
spadek
guarding
Single family dwellings:1. Stairs, landings, ramps, edges of internal floors. H= 900mm. 2. External balconies and edges of roof. H= 1100mm.
bắt đầu học
osłona / ochrona
suitable handrails for common stairs
Flights and landings should be guarded at the sides to a height of 900mm. The construction should be that children will not readily be able to climb the guarding and a 100mm ball cannot pass through any openings in the guarding.
bắt đầu học
odpowiednie porecze dla powszechnych schodów poręcze
formula
The normal relationship between the dimensions of the rise and going is that twice the rise plus the going (2R+G) should be between 550mm and 700mm.
bắt đầu học
wzór
2R+G = 550mm -700mm
readily
Flights and landings should be guarded at the sides to a height of 900mm. The construction should be that children will not readily be able to climb the guarding and a 100mm ball cannot pass through any openings in the guarding.
bắt đầu học
łatwo
Utility stair
bắt đầu học
schody użyteczności publicznej
external stairs
For dwellings, for external tapered stairs that are part of the buildings, the going should be a minimum of 280mm.
bắt đầu học
schody zewnętrzne
Width of STAIRS
minimum width of 900mm. Landings should be at least the width and length of the minimum width of the fight. For buildings other than dwellings, each landing should have an unobstructed length of at least 1,200m.
bắt đầu học
Szerokość schodów

Bạn phải đăng nhập để đăng bình luận.